WEEM 1126-32 178mm x 8mm Y-weight polyester Cloth Backing , Silicon Carbide Floor Sanding Disc
WEEM 1126-32 Floor Sanding Discs, 7" x 5/16 "size, are used on a
hand-held edger machines to sand areas on a floor where the
drum/belt sander does not reach. It structured premium silicon
carbide grain bonded to an extra Y-weight polyester backing. Fits
machine like: Clarke, Hold, Porter Cable, Skil and Tennant.
We have selected premium silicon carbide gain using resin on resin
bond, coated on strong, heavy Y weight waterproof polyester backing
make into WEEM 1126 Floor Sanding Abrasive. The Y weight waterproof
Polyester backing providing strong toughness and strength supported
during sanding. We use this material make into WEEM 1126-32 Floor
sanding discs. WEEM 1126-32 Floor sanding discs are of size 7" x
5/16 " (178mm Diameter by a 8mm hole).
WEEM 1126-32 Floor sanding discs fit for portable hand-held edge
sander for working on the perimeter of the room, sand areas on a
floor where the drum/belt sander does not reach. It has been proven
to be best choice for floor sanding use.
The premium silicon carbide grain use on WEEM 1126-32 Floor Sanding
disc is very sharp and durable. Silicon carbide (SiC) is a very
hard and crystal structure produces a fine straight edged grind
lines. It provided a fast cut with excellent finish removal and
resistance to loading. SiC is idea for floor sanding.
WEEM 1126-32 7" x 5/16 " Floor sanding disc use close coated
technique and Anti-static treatment. A closed coat product has a
higher number of abrasive cutting points per square inch and
results in higher stock removal rate and longer time before the
abrasive wears out. Normally results in a better finish.
Anti-static treatment can help reduce or prevent clone during
Floor sanding, floor edge sander;
It is made for floor belt sander such as: Clarke, Hold, Porter
Cable, Skil and Tennant etc. Strong backing and fast cut rate.
|Backing:||Y weight waterproof polyester|
|Bond:||Resin over resin|